产品中心
当前位置 :网站首页 > 产品中心
产品中心

卧式直线斜边磨边机

详细说明

JTX-7/JTX-8
卧式斜边机系列
Horizontal Glass Beveling Machine Series

产品特点
JTX-7/JTX-8卧式直线斜边玻璃磨边机是一种全新的玻璃深加工设备。它改变了传统的玻璃立式链条传送方式,采用同步带水平夹持传送的方法,使磨边的精度大幅度提高。本机主要由五大系统构成,主要分为:控制系统,磨削系统,夹持传送系统,冷却系统与承接系统。整机结构紧凑,布局合理,外观和谐统一。控制系统:采用仪表显示电流与电压,机器运转情况一目了然。磨削系统:选用高速三相交流电机,设计使用寿命二十年,保证机器在长时间使用过程中各项性能持续稳定;磨轮选用国际流行的最新制造工艺,保证了加工的精度及抛光亮度,已确保达到镜面效果。夹持传动系统:选用单蜗齿轮变速,交流变频调速,在运行过程中,速度可在0-4米之间平稳过渡,以满足不同的工艺要求。夹持传送系统:选用意大利进口同步带,表面粘附PU与红胶,既降低夹持传送过程中玻璃的破损率,又保证了运行过程中玻璃与同步带之间夹紧力足够,玻璃与同步带不发生相对滑动,确保磨制的玻璃成品的线精度达到要求。冷却系统:采用循环水,双泵双箱冷却,其中一只水箱内加入氧化铈抛光粉,既保证了循环冷却又提高了抛光亮度。承接系统:选用与传送系统共同的同步带,避免了玻璃运行过程中的表面划伤,控制部分与工作部位有机配合,以人为本,凸显人性化设计。使用方法简单明了,磨削精度稳定持续,是玻璃深加工企业斜边磨边最理想设备。

CHARACTERISTICS
JTX-7/JTX-8 horizontal bevel glass grinder is a new type of glass deep processing equipment. It changes the traditional glass vertical chain transmission mode and adopts the synchronous belt horizontal clamping transmission method, which greatly improves the precision of edge grinding. This machine is mainly composed of five systems, including: control system, grinding system, clamping transmission system, cooling system and receiving system. The machine has compact structure, reasonable layout and harmonious appearance. Control system: using the meter to display the current and voltage, the machine operation is clear at a glance. Grinding system: choose high-speed three-phase ac motor, design the service life of 20 years, ensure the machine in the long time use process of the performance of the continuous stability; The grinding wheel adopts the latest international popular manufacturing technology, which ensures the machining accuracy and polishing brightness, and ensures the mirror effect. Clamping transmission system: adopt single worm gear to change speed and ac frequency to change speed. In the process of operation, the speed can be smoothly transferred between 0-4 meters to meet different process requirements. Clamping transmission system: the Italian imported synchronous belt is adopted, and PU and red glue are adhered on the surface, which not only reduces the breakage rate of glass in the process of clamping transmission, but also ensures sufficient clamping force between glass and the synchronous belt in the process of operation, and the relative sliding between glass and the synchronous belt does not occur, thus ensuring the line precision of the finished glass to meet the requirements. Cooling system: using circulating water, double pump and double box cooling, adding cerium oxide polishing powder in one of the water tanks, which not only ensures the circulation cooling but also improves the polishing brightness. To undertake the system: choose the common synchronous belt with the transmission system, avoid the surface scratch in the process of glass operation, the control part and the working part cooperate organically, people-oriented, highlighting the humanized design. The method of use is simple and clear, and the grinding precision is stable and continuous.
 
主要技术参数
Main Technical Parameters
JTX-7
JTX-8
外形尺寸 Measurement3400*1000*1730mm3400*1000*1730mm
总质量 Weight2000kg2100kg
可加工玻璃厚度 Processing Thickness3-25mm3-25mm
倒角角度 Angle5-35°5-35°
最大斜面宽度  Max Bevel Surface Width20mm25mm
最小加工尺寸 Mini Size Of Glass25*25mm25*25mm
加工速度  speed0-4m/min0-4m/min
输入电压/频率 Volt380v/50hz380v/50hz
装机功率 Power13kw14.5kw

这里已调用系统的信息评论模块,无需修改!
这里已调用系统的评论列表模块,无需修改!